Recent Jobs For Sentry Security Solutions

June 4, 2026 | Burleson, TX

We activated the customer’s existing Vista 20 security system, ensuring all existing window protection devices were properly connected and functioning. To provide remote access and monitoring capabilities, we installed and configured an Alarm.com SEM cellular communicator, allowing the system to communicate with the Alarm.com app. At the customer’...

May 27, 2026 | Burleson, TX

We installed a Cova video surveillance system at the customer’s residence, consisting of a recorder and eight cameras provided by the customer. As part of the project, we carefully removed the existing Honeywell camera system and replaced it with the new equipment. Installation required the use of a 25-foot ...

May 20, 2026 | Alvarado, TX

As part of this security upgrade, we installed four (4) ADC 4MP battery-powered spotlight cameras equipped with solar panels and motion-activated recording capabilities. These cameras provide high-definition video surveillance while operating efficiently on rechargeable battery power supported by continuous solar charging. The integrated spotlight and motion detection features enhance security by ...

May 1, 2026 | Burleson, TX

We installed a SEM DSC PowerSeries communicator to integrate with the customer’s existing security system equipment. Following installation, we configured and activated the mobile app, provided a full system demonstration, and ensured the customer was comfortable with its operation and key features. The system was thoroughly tested to ensure ...

April 27, 2026 | Fort Worth, TX

Six motion sensors were installed, the rear storage door sensor was relocated, and an additional door sensor was installed on the patio door. The system was tested and is functioning properly.

April 13, 2026 | Dallas, TX

Installed, tested, and verified signals for a new 2GIG alarm system. The installation included one 2GIG GC Touch 7” touchscreen control panel with Z-Wave technology and built-in cellular communicator for the office and shop, one door sensor, and one motion detector. User codes were programmed, and the alarm system was demonstrated ...

April 10, 2026 | Cresson, TX

Installed, tested, and demonstrated the Honeywell V20 system while taking over the existing Honeywell/DSC system. The warehouse motion detector was disabled to repurpose the wiring for a keypad installation. The overhead door was wired in series with the warehouse man door. Equipment installed included one Honeywell V20 panel, two 6160 ...

March 30, 2026 | Dallas, TX

We provided a full solution by installing, testing, and demonstrating the LiftMaster CAPXM video call box, CAP2D door controllers, cellular router, and enclosure, ensuring the system was fully operational and ready for use.

March 27, 2026 | Arlington, TX

We delivered a complete solution by installing a 16-channel surveillance system with high-resolution cameras covering both interior and exterior areas, along with a network speaker for live talk-down monitoring. We also installed a Honeywell burglar alarm system with keypad, expansion module, motion detection, and glassbreak sensors, added cellular communication for ...

March 23, 2026 | Burleson, TX

We completed a new 2GIG alarm and Alarm.com CCTV system installation, ensuring all devices were fully installed, tested, and demonstrated for the client.

March 17, 2026 | Dallas, TX

We installed a 4-camera CCTV system using the existing prewiring and set up a 2GIG alarm system, including a TS2 secondary keypad, to provide reliable security and convenient system control throughout the office.

March 17, 2026 | Cedar Park, TX

We installed an IQ4 panel with PowerG devices, including contacts, motion detection, and a repeater, then completed full system testing by sending signals and verifying strong device communication at the panel.

March 6, 2026 | St.Paul, TX

Inspiration HOA recently partnered with Sentry Security Solutions to install three solar-powered License Plate Recognition (LPR) camera systems at key entry points within the community. The goal was to enhance neighborhood security and provide an additional layer of protection for the residents. These advanced systems capture license plate information for ...

March 5, 2026 | Fort Worth, TX

We replaced the outdated 2GIG panel with a new system, integrated the existing hardwired siren as a secondary alert, connected all existing WiFi cameras, and added a new exterior camera at the front door. We also completed full system setup, including programming user codes, configuring app access, and providing a ...

March 3, 2026 | Weatherford, TX

We installed a 2GIG alarm system, secured the two man doors and one overhead door, and mounted a keypad by the front entry for easy system access and control.